|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PRELIMINARY DATA SHEET NEC's HIGH NOISE REDUCTION HIGH SPEED ANALOG OUTPUT 5 PIN SOP OPTOCOUPLER FEATURES * HIGH COMMON MODE TRANSISENT IMMUNITY: CMH,CML: 10 kV/s MIN * HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s. * HIGH SUPPLY VOLTAGE: VCC = 35 V * HIGH SPEED RESPONSE: tPHL = 0.8 s MAX, tPLH = 1.2 s MAX * AVAILABLE IN TAPE AND REEL: PS8101-F3, F4 ESD SENSITIVE PS8101 DESCRIPTION NEC's PS8101 is an optically coupled isolator containing a GaAIAs LED on the light emitting diode (input) side and a PIN photodiode and a high speed amplifier transistor on the output side on one chip. Its small package makes it ideal for high density circuits and applications. APPLICATIONS * COMPUTERS AND PERIPHERALS MANUFACTURES * GENERAL PURPOSE INVERTER * POWER SUPPLIES * RELAY AND PULSE TRANSFORMER REPLACEMENTS ELECTRICAL CHARACTERISTICS (TA = 25C) PART NUMBER SYMBOLS VF PARAMETERS Forward Voltage, IF = 16 mA Reverse Current, VR = 3 V Forward Voltage Temp. Coefficient, IF = 16 mA Terminal Capacitance, V = 0 V, f = 1.0 MHz High Level Output Current IF = 0 mA, VCC = VO = 5.5 V High Level Output Current IF = 0 mA, VCC = VO = 30 V Low Level Output Voltage IF = 16 mA, VCC = 4.5 V, LO = 1.2 mA Low Level Supply Current IF = 16 mA, VO = Open, VCC = 30 V High Level Supply Current IF = 0 mA, VO = Open, VCC = 30 V Current Transfer Ratio, IF= 16 mA, VCC = 4.5 V, VO = 0.4 V Isolation Resistance, V IN-OUT = 1k VDC, RH = 40 to 60 % Isolation Capacitance, V = 0, f = 1.0 MHz Propagation Delay Time, (High Low)1 IF = 16 mA, VCC = 5 V, RL = 2.2 k , CL = 15 pF Propagation Delay Time, (Low High)1 IF= 16 mA, VCC = 5 V, RL = 2.2 k , CL = 15 pF Common Mode Transient Immunity at High Level Output2 IF= 0 mA, VCC = 5 V, RL = 4.1 k , VCM = 1.5 kV Common Mode Transient Immunity at Low Level Output 2 IF= 16 mA, VCC = 5 V, RL = 4.1 k , VCM = 1.5 kV UNITS V A mV/C pF nA A V A A % pF s s kV/s kV/s 10 -10 15 10 11 PS8101 MIN TYP 1.7 -1.6 60 3 500 100 0.1 50 0.01 20 0.4 0.5 0.6 0.8 1.2 2 35 0.4 MAX 2.2 10 Diode IR VF/T Ct IOH(1) IOH(2) Detector VOL ICCL ICCH CTR RI-O CI-O tPHL Coupled tPLH CMH CML NOTES: 1. CTR rank K: 20 to 35 (%) N: 10 to 35 (%) CON'T ON NEXT PAGE. California Eastern Laboratories PS8101 ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS Diode IF VR PD Detector VCC VO IO PC Coupled BV TA TSTG PARAMETERS UNITS RATING ORDERING INFORMATION PART NUMBER PS8101 PACKAGE 5-pin SOP PACKAGE STYLE Magazine case 100 PCS Embossed Tape 2500 pcs/reel APPLIICATION PART NUMBER* PS8101 Forward Current Reverse Voltage Power Dissipation Supply Voltage Output Voltage Output Current Power Dissipation Isolation Voltage2 Operating Ambient Temp. Storage Temperature mA V mW V V mA mW Vr.m.s. C C 25 5.0 45 35 35 8.0 100 2500 -55 to +100 -55 to +125 PS8101-F3 PS8101-F4 * For the application of the Safety Standard, following part number should be used. Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for one minute at TA = 25C, RH = 60% between input and output. (Continued from previous page) NOTES: 2. Test Circuit for Propagation Delay Time: Input Pulse input (IF) (Pulse width = 100 s Duty Cycle = 1/10) Input (monitor) VCC = 5 V 0.1 F RL = 2.2 k VO (monitor) CL = 15 pF 50% 5V Output 1.5 V tPHL VOL tPLH 47 *CL is approximately 15 pF which includes probe and stray wiring capacitance. 3. Test Circuit forCommon Mode Transient Immunity: 1.5 kV VCM 90 % IF 0.1 F RL = 4.1 k VO (monitor) tr V0 (IF = 0 mA) VCM tf VCC = 5 V 10 % 0V 5V 2V 0.8 V V0 V0L Usage Cautions: (IF = 16 mA) 1. When handling this product, precautions should be taken against static electricity. 2. A by-pass capacitor of 0.1 F is used between VCC and GND. PS8101 OUTLINE DIMENSIONS (Units in mm) PS8101 3.4 +0.3 -0.1 MARKING (Top View) 5 4 3 1. 2. 3. 4. 5. Anode Cathode GND VO VCC 8101 N234 No. 1 pin Mark Initial of NEC (Engraved mark) N Assembly Lot 1 2 N 2 34 7.00.3 4.4 Week Assembled Year Assembled (Last 1 Digit) Rank Code 2.6 0.2 0.1 0.1 1.27 0.4 +0.10 -0.05 0.15 +0.10 -0.05 0.50.3 0.25 M Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 12/22/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. |
Price & Availability of PS8101-F4 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |